Taring; Weighing; Record Weight Value (Freeze) - KERN and SOHN HFD Mode D'emploi

6.5

Taring


Suspend preload.
Press the TARE button, the zero display and the [] above TARE will appear.
The weight of the container is now internally saved.

Weigh the material, the net weight will be indicated.

After removing the preload weight appears as negative display.

To delete the tare value, remove load from crane scales and press the ZERO
button.
6.6

Weighing


Loading the crane scales.
The weight value will be displayed at once. After standstill control the [] above
will appear.
Overload warning
Overloading exceeding the stated maximum load (max) of the balance, minus
a possibly existing tare load, must be strictly avoided. This could cause
damage to the balance.
Exceeding the maximum load is indicated by the display „--ol-". Unload
balance or reduce preload.
6.7

Record weight value (freeze)


Press the HOLD button to „freeze" or to record the current weight value.
It remains displayed until it is deleted. The [] above HOLD appears.

In order to delete the "frozen" or the recorded weight, press the HOLD button.
The [] above HOLD extinguishes.
28 HFD-BA-e-1921