Switch-Over Weighing Unit; Weighing With Tare; Taring; Delete Tare - KERN and SOHN KXS-TM Instructions D'utilisation

7.5 Switch-over weighing unit

 Press the UNIT-key
The weight gauge changes between „kg"and "g".

7.6 Weighing with tare

After taring no numeric input of a tare weight can follow.
After the numeric input of a tare weight, the system can only be tared if
„tare weight > PRE TARE
7.6.1

Taring

 Deposit weighing vessel. Wait for stability display, then press the TARE button
Zero display and indicator net appear.
 The weight of the container is now internally saved.
 Weigh the material, the net weight will be indicated.
 After removing the weighing container, the weight of the weighing container
appears as negative display.
 The taring process can be repeated any number of times, e.g. when adding
several components for a mixture (adding). The limit is reached when the whole
weighing range is exhausted.
 With the BG/ NET key you can switch between gross weight and net weight, see
chapter 7.7.
7.6.2

Delete tare

 Unload balance and press the TARE key.
The NET indicator turns off, the zero display shows.
KXS/KXG-TM-BA_IA-e-1621
value"
19