Operation; Weighing; Taring - KERN and SOHN MPE Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10 Operation

10.1 Weighing

• However, you can reset the weighing scale to zero by pressing
• If the person is heavier than the weighing range, "OL"

10.2 Taring

The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the person is displayed in subsequent weighings.
(example)
(example)
• When the balance is unloaded the saved taring value is
• To delete the stored tare value, release scales and press
21
Start balance by pressing
The balance will carry out a self-test
The scales are ready for operation as soon as the weight
display for "0.0 kg" has appeared.
the
key.
Have person stand in the centre of the scales. Wait until the
standstill display „STABLE" appears, then read the weighing
result.
(=overload) will appear in the display.
Put object (such as towel or padding) on the weighing pan.
Press
, the zero display appears.
„NET" is shown at the bottom on the left.
Allow the person to step onto the centre of the weighing
platform. Wait until the standstill display „STABLE" appears,
then read the weighing result.
displayed with negative sign.
.
MPE-BAPS-e-2121

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mpe 250k100hnmMpe 250k100pnmTmpe 250k-1hem-aTmpe 250k-1pem-a

Table des Matières