Turn On/Off; Set Balance To Zero - KERN and SOHN HFD Mode D'emploi

6.3

Turn on/off

Switching On

Press the ON/OFF button on the balance keyboard. The display lights up and the
balance carries out a selftest. As soon as the weight display appears, the balance
is ready for weighing.
Switch on only possible at the keyboard of the balance.
Switching Off

Press the ON/OFF button on the balance keyboard.
6.4

Set balance to zero

In order to obtain optimal weighing results, reset to zero the balance before weighing.

Unload the balance

Wait for stability display

Press the ZERO button.
Zero display and the [] symbol over a appears.
HFD-BA-e-1921 27