10.1.1 Weighing with wheelchair
Place wheelchair with person on the centre of the scales
Fasten the brakes of the wheelchair
Do not leave the person unattended
When the person sits quietly, read weighing value 1
Loosen the brakes and carefully pull off the transportation stretcher/wheelchair
with the person
After that weigh the wheelchair without person and subduct this weight from
weighing value 1, from there results the person's weight.
10.2 Taring
The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the person is displayed in subsequent weighings.
Put object (such as towel, padding or empty wheel chair) on
(example)
Press
Allow the person to step onto the centre of the weighing
(example)
When the balance is unloaded the saved taring value is
To delete the stored tare value, release scales and press
14
the weighing pan.
, the zero display appears.
„NET" is shown at the bottom on the left.
platform.
Wait until the standstill display „STABLE" appears, then read
the weighing result.
displayed with negative sign.
.
MWB-BA-e-1710