Publicité
OPERATING INSTRUCTIONS
en
4.1
Extending the evaluation unit
34
O P E R A T I N G I N S T R U C T I O N S | WLL180T-x632, WLL180T-x634
Fiber optic connection
3
1
Fiber cable
2
Insertion sign of Fiber cable
Figure 4: Fiber optic connection
1.
Open the optical fiber interlocking 1
2.
Insert the optical fibers 4 into the provided openings as far as they will go
(approx. 15 mm) 2
3.
Close the optical fiber interlocking 3
5 Sender/receiver indicator
NOTE
When using a proximity variant with coaxial fiber arrangement, connect the core fiber or
fiber marked in white to the sender. Connect the second fiber to the receiver.
Use of fibers with thin end sleeves
Fine fiber
Cut position
Figure 5: Fibers with thin end sleeves
Fiber with thin end sleeve
1
Separation position
2
Adjustment cap
3
1.
Rotate the adapter piece counter-clockwise and guide the optical fibers in. Lock by
turning clockwise.
2.
Cut off the excess optical fiber.
Slide each evaluation unit onto the mounting rail and hook it in.
Attach the end piece on both sides to secure.
Up to 16 units can be connected to each other via the bus connectors.
Adapter cap
8015556/1PJO/2024-10-07 | SICK
Subject to change without notice
Publicité
