Publicité
2
Safety information
2.1
General safety notes
2.2
Intended use
2.3
Improper use
2.4
Qualification of personnel
8015556/1PJO/2024-10-07 | SICK
Subject to change without notice
Instructions to action
The arrow denotes instructions to action.
►
1.
The sequence of instructions is numbered.
2.
Follow the order in which the numbered instructions are given.
✓
The tick denotes the results of an action.
Connection, mounting and configuration of the product must only be car‐
ried out by qualified personnel.
This product does not constitute a safety component as defined in the
NO
Machinery Directive.
2006/42/EC
SAFETY
Do not install the product in places exposed to direct UV radiation (sun‐
light) or other weather conditions.
The product must be adequately protected against moisture and contami‐
nation.
The WLL180T fiber-optic sensor is an opto-electronic sensor which – in combination
with fibers – is used for optical, non-contact detection of objects.
A fiber-optic sensor is designed for mounting and may only be operated according to
its intended function. For this reason, the fiber-optic sensor is not equipped with direct
safety devices.
The system designer must provide measures to ensure the safety of persons and
systems in accordance with the legal guidelines.
SICK AG assumes no liability for losses or damage arising from the use of the product,
either directly or indirectly. This applies in particular to use of the product that does not
conform to its intended purpose and is not described in this documentation.
If the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
•
This sensor has not been explosion tested. Do not use near flame, explosive gases
or liquids
•
Do not use in water.
•
Do not use outdoors.
•
Do not disassemble, repair or modify the sensor. Doing so may result in fire or
electric shock.
Any work on the product may only be carried out by personnel qualified and authorized
to do so.
Qualified personnel are able to perform tasks assigned to them and can independently
recognize and avoid any potential hazards. This requires, for example:
OPERATING INSTRUCTIONS
O P E R A T I N G I N S T R U C T I O N S | WLL180T-x632, WLL180T-x634
en
31
Publicité
