Publicité
IEC 60601-1-2:2014—(Ed 4.0) EMC/EMI Compliance
The equipment needs special precautions regarding EMC and needs to be installed and put into service
according to the EMC information provided in the accompanying documents.
•
The portable and mobile RF equipment can affect the equipment.
•
Use of accessories and cables other than those specified, with the exception of accessories
and cables qualified and sold by the manufacturer of the equipment may result in increased
emissions or decreased immunity of the equipment and may cause the system to be non-
compliant with the requirements of IEC 60601-1-2:2014.
•
The equipment should not be used adjacent to or stacked with other equipment and that if
adjacent or stacked use is necessary, the equipment should be observed to verify normal
operation in the configuration in which it will be used.
The table below elaborates the emission compliance of the equipment's
electronics.
The equipment is intended for use in the electromagnetic environment specified
below. The customer or the user of the equipmenet should assure that is is used in
such an environment.
Guidelines
The equipment uses RF energy only for its
internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
The equipment is suitable for use in all
establishments including domestic
establishments and those directly
connected to the pucliv low voltage power
supply network that supplies buildings
used for domestic purposes.
34
Publicité
