Publicité
Hand Controller Information and
Diagnostics
In addition to controlling the lift, the A-Series hand controller is an interface that provides usage and
diagnostics data from the lift.
To view data and setting through the hand controller:
1.
Press the
key of the hand controller. The Menu screen displays.
2.
Use the
• The Scale menu is for using and reviewing the lift's scale capabilities.
• The Usage Stats menu is for reviewing usage information for the lift.
• The Diagnostics menu is for service and technical support of the lift.
3.
On the menu you want to review, press the
• If you select the wrong menu, at the bottom of the display:
•
Select EXIT/GO BACK and press the
or
•
Select EXIT ALL and press the
Emergency Stop
The lift unit also has an Emergency Shut-off feature so that in an emergency the operator can completely
cut the power to the lift.
To perform an Emergency Stop:
1.
Pull down once on the red emergency lowering cord on the underside of the lift unit.
• The lift immediately stops, beeps once, and all power to the lift shuts off
•
To lower the patient after an emergency stop, pull and hold down the red emergency
lowering cord
• All lift functions are disabled
• The On indicator light and display turn off
• The white plastic tab at the top of the red emergency lowering cord pops out
To turn the lift on after an Emergency Stop:
1.
Have a Handicare authorized service dealer inspect your lift to determine the cause for needing to
use the Emergency stop.
2.
Use a finger to press the white plastic tab at the top of the red emergency lowering cord back into
place.
The white plastic tab must be pushed back into place in order to restore power to the lift.
Figure 6: The Hand Controller Menu Screen
keys to scroll through the menu options.
key. The selected menu displays.
key to return to the previous screen
key to return to the main screen.
13
Publicité
