Publicité
3.
Hold the latch down and tilt the hook about 90°.
4.
Remove the carry bar from the quick release hook.
Install a Quick Release Hook
See the Carry Bar Connector Installation instructions included with the carry bar.
Wi-Fi
The A-450/A-625 can be purchased with an optional Wi-Fi diagnostic and usage module.
Connect to the Lift via Wi-Fi
To connect Wi-Fi-enabled lift to a Wi-Fi enabled PC, Laptop, Tablet, or Cellphone via Wi-Fi:
Turn on the lift.
1.
• The lift must be On; Wi-Fi doesn't work if the lift is on Standby.
2.
Press any button on the hand controller to turn on the lift.
3.
Power on the device you are connecting to the Lift system.
• If using a laptop, open the network connecting wizard.
• If using a smartphone or tablet, open the Wi-Fi menu.
Figure 13: Tilt the Hook
Figure 14: Remove the Hook
17
Publicité
