Publicité
Declaration of conformity
Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the Mirka® products (listed below and see "Technical data" table for particular model) to which
this declaration relates are in conformity with the following standards or other normative documents: EN 62841-1:2015 + AC:2015, EN
62841-2-4:2014 + AC:2015, EN 55014-1:2021, EN 55014-2:2021, EN 61000-3-2:2019 + A1:2021, EN 61000-3-3:2013 + A1:2019 + A2:2021, EN
301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 300 328 V2.2.2, EN IEC 63000:2018 in accordance with the regulations 2006/42/EC, 2011/65/EU,
2014/53/EU.
®
Products: Mirka
LEROS(-S) 950X
Jeppo 06.09.2024
Place and date of issue
Company
Original instructions. We reserve the right to make changes to this manual without prior notice.
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool. Keep these
instructions in a safe and accessible place. Read and comply with state and local regulations.
Required personal safety equipment
Read
operator's manual
Symbols
Complies with EU relevant standards
Complies with China RoHS requirement
Complies with Australia & New Zealand RCM requirement
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage.
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Stefan Sjöberg, CEO
Wear
safety glasses
ear protection
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel. +358 20 760 2111
Fax +358 20 760 2290
www.mirka.com
Wear
Wear
safety gloves
en (original)
Wear
face mask
25
Mirka® LEROS(-S) 950X
Publicité
