Publicité
and the PD port of the device to be charged. The charging
process will start automatically. When a fast-charging
device is charged at the Type C port, the fourth LED of the
battery capacitor indicator lights up green.
In case if the charging process does not begin immediately,
press the On/off button
process. The current battery status of the power bank is
displayed during the charging process by the battery status
indicator
To end the charging process, disconnect the USB charging
cable from the mobile device and the power bank. The
power bank and the battery status indicator
off after approx. 30 seconds.
To switch off the power bank after your mobile device is
disconnected: press the On/off button
bank and the battery status indicator
NOTE:
1) If you use all the USB ports, a voltage of 5 V will output
at all the outputs. The maximum output current must not
exceed 3 A for all outputs. If all USB outputs are used, fast
charge mode will not be activated.
2) If PD output
connected to another device for charging, the PD mode will
be terminated and switched to normal charge mode. All
devices will now be charged at 5 V each.
P Charging mobile devices wirelessly
and via USB simultaneously
You can charge up to three devices at the same time using the
USB ports and the wireless charging function of the power
bank.
If all outputs are used at the same time, the sum of the output
current must not exceed 3 A.
GB/IE 42
8
.
1
is in PD mode, and another USB port is
3
briefly to begin the charging
8
8
will switch
3
twice. The power
will switch off.
Publicité
