Publicité
Do not place magnetic recording media inside the charging
area during charging. The magnetism generated may erase
the data on credit cards. It may also cause wristwatches
and other precision instruments to malfunction.
During charging and immediately after charging, the Qi
charging surface
This is normal and not a malfunction. If there is an unusual
heating, check the Qi charging surface
device.
Always place only one mobile device to charge on the Qi
charging surface
Compatibility with all Qi devices cannot be guaranteed.
Do not attach an anti-slip mat or stickers to the Qi charging
surface. The presence of an anti-slip mat or stickers between
the mobile device to be charged and the Qi charging
surface
4
If a cover or decorative accessory that does not comply
with the Qi wireless power standard has been attached to
the supported device, it may not be possible for the device
to be charged depending on the material, thickness, etc. of
the cover or accessory. In such cases, remove the attached
cover or accessory.
If charging does not start even after the supported device
has been placed in the charging area, place the device
near the center of the charging area.
Before starting with wireless charging, read the instructions
provided with the mobile device as well.
If you use a USB power supply for charging the power
bank, the socket used must always be easily accessible so
that the USB power supply can be quickly removed from
the socket in the case of emergency. Please also refer to the
manufacturer's instruction manual.
ATTENTION! Two Qi charging devices and/or power
banks must never be placed on top of each other with the
charging surface. A device defect is the possible consequence.
GB/IE 36
4
and mobile device will be warm.
.
4
that may prevent charging start.
4
and mobile
Publicité
