Publicité
no Qi compatible device is detected and idle for approx.
30 seconds.
When the charging process has finished (i.e. the mobile
device is fully charged) the Qi status indicator
flashing and light blue.
The Qi status indicator
detected on the Qi charging surface
remove your device and make sure that there are no
unwanted metallic objects between your device and the Qi
charging surface
To stop the wireless charging, gently pull your device away
from the Qi charging surface
cups
. The Qi status indicator
5
mode). If no Qi compatible device is detected for approx.
30 seconds, the Qi status indicator
To switch off the power bank during the standby mode,
press the On/off button
and battery status indicator
9
NOTE:
*
1) Qi status indicator
(standby mode) when wireless charging has finished if the
mobile device closed the wireless communication between
the Qi charging surface
2) All devices to be wirelessly charged must comply with Qi
Standard.
3) The different modes of the Qi status indicator are
summarized below:
Qi wireless
charging status
Starting process (boot
phase), standby or searching
for a Qi charging device
GB/IE 40
will go off when errors are
9
and then try again.
4
4
twice. The Qi status indicator
3
may change back to blue colour
9
4
and the mobile device.
Qi status indicator
Lights blue
4
. In this case,
to release the suction
will light blue (standby
9
will go off.
9
will then go off.
8
stop
9
9
Publicité
