Publicité
Qi wireless
charging status
Charging
Fully charged
Fault/Error condition
No Qi compatible device
detected
P Charging mobile devices with the
power bank via the USB output ports
You can charge up to two devices at the same time using the
USB ports of the power bank. If all outputs are used at the
same time, the sum of the output current must not exceed 3.0 A.
To charge your USB device with the Type C port, connect
the USB type A plug of the USB cable
charging cable of the device to be charged to the USB
Type A output
of the USB cable
charged. The charging process will start automatically.
When a fast-charging device is charged at the Type A port,
the fourth LED of the battery capacitor indicator lights up
green.
NOTE: You could also charge your conventional USB
devices from the USB Type A output port
bank using the included USB cable
micro USB cable (not included).
To charge your USB Power Delivery (PD) enabled device,
connect the USB Type C plugs of your USB Type C to Type
C cable (not included) to the PD port
Qi status indicator
Flashes blue
Lights blue
Indicator off
Lights blue
2
. Then connect the USB Type C plug
6
to the Type C input of device to be
6
or the original
of the power
2
or a USB Type A to
6
of the power bank
1
9
GB/IE 41
Publicité
