Publicité
Caution: Do not touch the frying pot during and after use, as it gets very hot.
Please always hold the frying pot by the handle.
5.Determine the required preparation time for the ingredients ( see section 'Settings'
in this chapter).
6.Some ingredients require shaking halfway through the preparation time (see section
"Settings" in this chapter). To shake the ingredients, pull the frying pot out of the appli-
ance by the handle and shake it. Then slide the pot back into the air fryer.
Caution: Do not press the button on the handle during shaking.
TIP: If you set the timer to half of the preparation time, you will hear the timer buzzer
when you have to shake the ingredients. However, this means that you have to set the
timer again to the remaining preparation time after shaking.
7. When you hear the timer buzzer, which indicates the set preparation time has
elapsed, pull the frying pot out of the appliance.
TIP: You can adjust temperature or time according to your taste during use. Your set-
tings will be kept for about one minute after you pull the pot out of the body.
8. Check if the ingredients are ready or not.
If the ingredients are not ready yet, simply slide the frying pot back into the appliance
and set the timer to a few extra minutes.
9. To remove ingredients (e.g. fries), pull the pot out of the Hot-air fryer and place it on
trial framework.
Do not turn the pot upside down with the rack still attached to it, as any excess oil
that has collected at the bottom of the pot will leak onto the ingredients.
The pot and the ingredients are hot, steam may escape from the pot depending
on the type of the ingredients in the air fryer.
10. Empty the basket into a bowl or onto a plate.
11. When a batch of ingredients are ready, the Hot-air fryer is instantly ready for pre-
paring another batch.
CONTROL PANEL INSTRUCTIONS
Operation Instructions:
1. Plug in the power supply, install the pot assembly. Press the power key buzzer to
prompt and all indicators light up start/stop buttons flash display, digital screen default
display '180º' '8min'
2. Click the Menu key to select the appropriate menu mode, Tap the start/stop button
to start cooking.
3. Temperature and Time Background Light: Displays icons for adding and subtracting
temperature and time. Temperature plus and minus key: the temperature is increased
or decreased in units of 5 ℃, the maximum temperature is set to 200℃, the minimum
temperature is 80 ℃, and long press can be continuously increased or decreasing;
Time plus or minus key: the time is increased or decreased in units of 1 minute, the
maximum time is 60 minutes, the minimum setting time is 1 minute, and long press
can continuously increase or decrease.
4. Power on and off button: tap the machine to enter the setting state (if there is no op-
eration within 5 minutes, directly return to the standby state); Long button 4S, screen
displays ' OFF' then shutdown.
5. Start/Stop button: Tap Start or Pause the program that is set.
24
Publicité
