Complete Filter Assembly - Whirlpool W10768191 Instructions D'installation

8. Install blower electrical terminal cover.
NOTE: When replacing cover, insert the terminal cover
tabs in the corresponding slots in the range, and push
the terminal cover rearward to engage.
9. Install terminal cover screw.

Complete Filter Assembly

You Will Need
Upper Filter Enclosure
■
(5) M5 x 15 mm screws and lock washers
■
8" Phillips screwdriver
■
Air filter
■
Enclosure Front
■
1. Attach the Upper Filter Enclosure to the Lower Filter
Enclosure by sliding the Upper Filter Enclosure straight
back into the Lower Filter Enclosure.
The final position of the Upper Filter Enclosure is to be
resting on the back shelf of the Lower Filter Enclosure with
the tabs of the Upper Filter Enclosure engaged in the Lower
Filter Enclosure.
NOTE: Cabinets and range removed from image for
clarification.
16
2. Using the five (5) M5 x 15 mm screws and the previously
disassembled lock washers, securely fasten the Upper
Filter Enclosure to the Lower Filter Enclosure.
2
3. Install Air Filter into the housing and then rotate it to its final
position.
NOTE: Confirm the Air Flow indicator, marked on the Air
Filter, points toward the front of the range.
4. Install the Enclosure Front by slightly tilting it towards you,
placing in the housing and rotating it up into the final
position.
2
Side View of Assembled Filter Housing
Side View of Assembled Filter Housing