Complete Installation; Range Hood Use; Range Hood Controls - Whirlpool LIB0143379 Instructions D'installation Et Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Secure the bottom of the duct with (2) 4.2 x 8 mm screws.
The range hood is designed to remove smoke, cooking
vapors, and odors from the cooktop area. For best results,
start the hood before cooking, and allow it to operate several
minutes after the cooking is complete to clear all smoke and
odors from the kitchen.
The hood controls are located on the front side of the canopy.
A
G
E
A. Duct cover holes
B. Duct cover
C. Control panel
D. Glass canopy
10

RANGE HOOD USE

B
C
D
F
E. Grease filter
F. LED lights
G. Grease filter release handle

Complete Installation

1. For non-vented (recirculating) installations only, install
charcoal filters over metal grease filter. See the "Range
Hood Care" section.
2. Install metal filters. See the "Range Hood Care" section.
3. Check the operation of the range hood blower and light.
See the "Range Hood Use" section.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.

Range Hood Controls

B
A
A. Blower speed maximum button
B. Blower speed medium button
C. Blower speed minimum button
D. Blower off button
E. On/Off light button
Operating the light
The On/Off light button controls both lights. Press once
for ON and again for OFF.
Operating the blower
The Blower Speed buttons turn the blower on and control the
blower speed and sound level for quiet operation. The speed
can be changed anytime during fan operation by pressing the
desired Blower Speed button.
The Blower Off button turns the blower off.
C
D
E

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

W11174175a

Table des Matières