Replacing Air Filter - Whirlpool W10768191 Instructions D'installation

The Duct Free Filter System is designed to require minimal
attention between filter changes. The filter is designed to last
for 6 months of average usage.
The housing can be cleaned with a paper towel and household
cleaners or with a cloth and warm soapy water. No special
cleaners are required.
IMPORTANT: Before cleaning and replacing the filter, make
sure all controls are off and the oven and cooktop are cool.
Items you Will Need:
New Filter (PN# W10748931)
■
Changing the Filter:
1. Remove Front Lower Access Panel.
2. Unlatch and remove the Enclosure Front.
3. Remove the Air Filter by gripping the two tabs at the top
of the filter.
24

REPLACING AIR FILTER

2
4. Thoroughly clean and dry the filter housing. You can clean
the housing with a paper towel and household cleaners
or with a cloth and warm soapy water. No special cleaners
are required.
5. Install Air Filter into the housing and then rotate it to its final
position.
NOTE: Confirm the Air Flow indicator, marked on the filter,
points towards the front of the range.
Side View of Assembled Filter Housing
6. Install the Enclosure Front by slightly tilting it towards
you, placing in the housing, and rotating it up into the
final position.
Side View of Assembled Filter Housing
7. Latch the Enclosure Front to the housing by positioning the
front clasps in the slots on the top of the housing; then, push
down on the clasp handles.
8. Replace the Front Lower Access Panel by aligning the studs
with the keyhole slots on the range. Press the access panel
forward into the slots and push downward to engage the
studs.
2
2