Télécharger Imprimer la page

Arai Helmet TX-4 Instructions D'utilisation page 22

Publicité

Left chinstrap cover (D-ring side)
Cache gauche de la jugulaire (côté anneau en forme de D)
Linke Kinnriemenabdeckung (D-ring seite)
20
Right chinstrap cover (long side)
Cache droit de la jugulaire (côté long)
Rechte Kinnriemenabdeckung (lange seite)
English
Remove the plastic chinstrap anchor cover from the steel chinstrap anchor
and slide the cover off the chinstrap.
Note the right and left, inside and outside of the chinstrap covers for
replacement.
To wash the chinstrap covers, put them into lukewarm water with small
amount of laundry soap or your own shampoo and wash gently by hand.
Rinse well with fresh water and wipe off with a soft cloth. Dry them in the
shade at ambient temperature.
WARNING: Never use petrol, thinner, benzene or any other solvents.
To replace the left chinstrap cover (D-ring side), ensure the female chinstrap
end snap side of the chinstrap and the leatherette side of the chinstrap
cover both face outward, slip the chinstrap cover onto the chinstrap.
Position the plastic chinstrap anchor cover over the steel anchor and push
the cover in the anchor until the tab on the back of the cover snaps fully
home.
To replace the right chinstrap cover ( long side ), ensure the cap side of the
chinstrap end snap (Arai logo impressed) on the chinstrap and the leatherette
side of the chinstrap cover both face outward, slip the chinstrap cover onto
the chinstrap.
Position the plastic chinstrap anchor cover over the steel anchor and push
the cover in the anchor until the tab on the back of the cover snaps fully
home.

Publicité

loading

Ce manuel est également adapté pour:

Xd4