Publicité
18
English
Lining is equipped with removable temple pads to offer a bit more room if
desired. To remove pads, open the pocket on each side of the lining and
gently remove pad from the pocket. If you wish to replace them in the
pockets, use double sided tape to fix them in place.
To wash the comfort lining, put it into lukewarm water with small amount
of laundry soap or your own shampoo and wash gently by hand. Rinse
well with fresh water and wipe off with a soft cloth. Dry it in the shade at
ambient temperature.
WARNING: Never use petrol, thinner, benzene or any other solvents.
To replace the lining, place the bosses over their plastic receptacles and
push them home.
WARNING: When reinstalling the comfort lining, be sure the lining is
properly positioned along the inside shape of the EPS (a.k.a. Styrofoam)
liner. If the comfort lining is not properly installed, the frame of the
comfort lining may fold when you put on and take off the helmet, which
may injure your skin, etc. Whenever you feel something is wrong with
the comfort lining, check that the lining is properly installed.
TO REMOVE/REPLACE CHINSTRAP COVERS
To remove the chinstrap covers, first remove the cheekpads as per previous
instructions.
Publicité
Chapitres
