Télécharger Imprimer la page

Arai Helmet TX-4 Instructions D'utilisation page 10

Publicité

LEFT ( CLUTCH SIDE )
CLOSE
OPEN
OPEN
INTERMEDIATE
8
RIGHT ( THROTTLE SIDE )
CLOSE
CLOSE
OPEN
INTERMEDIATE
English
TO OPERATE TOP VENTS
Simply push/slide the switch/lever on each duct to open/close the ducts
as illustrated.
WARNING: Never attempt to adjust ventilation ducts when in motion
riding your motorcycle.
TO OPERATE AIRFLOW SPOILER
To deploy the spoiler in the down position, simply pull it down by grasping the
center of its chin curtain.
To retract, the spoiler, simply push it up with the heel of your hand.
TO REMOVE/REPLACE FACE SHIELD/PEAK
To remove shield/peak, remove the two screws from each side of the peak
with flat blade screwdriver or coin.
The black spring clip on each side may be removed for cleaning but please
note that they can only be reinstalled properly in one direction. Do not
remove the base plates from the helmet.

Publicité

loading

Ce manuel est également adapté pour:

Xd4