Publicité
LEFT ( CLUTCH SIDE )
OPEN
INTERMEDIATE
LEFT (CLUTCH SIDE)
LOCKED POSITION
RELEASED POSITION
12
RIGHT ( THROTTLE SIDE )
CLOSE
CLOSE
OPEN
INTERMEDIATE
RIGHT (THROTTLE SIDE)
LOCKED POSITION
RELEASED POSITION
English
TO REMOVE/REPLACE DIFFUSERS
To remove diffusers for cleaning or maintenance, first slide the black open/
close lever at each side of the diffuser outward to fully open position.
Then slide the red lock lever at each side of the diffuser inward to release
lock system.
Finally slide back the black open/close lever inward to intermediate
position, and pull the black lever down/backwards to remove the diffuser
on each side.
To replace diffusers, place diffuser on helmet (contour of each diffuser will
match the recess of the helmet shell) and push on the center of the diffuser
until it snaps home. Repeat for the other side. Be sure the diffusers are fully
secured to the helmet shell and the red lock levers are in the locked position.
NOTE: Do not use oils or waxes to lubricate vents or other moving
parts. If you must lubricate such components, sparingly use the silicone
lubricant supplied with your helmet for eyeport trim dressing.
Publicité
Chapitres
