Publicité
INSTALLATION INSTRUCTIONS
6) Mount the right upper hinge on the bottom left corner and
install the cover.
7) Remount the doors and hinges, working from bottom to
top (from 1-4).
Fig. 23
4
ENSURING THE DOOR SEALS CORRECTLY
It is normal for the seal to be compressed after the door has
been reversed. With the door closed, use a hair dryer to
expand the seal and fill the gap between the door and the
body of the appliance. Take care not to hold the hair dryer
3
3
too close to the appliance, which could damage the seal.
A distance of approximately 3 15/16" should be suitable.
2
2
When completed, allow the seal and door to cool before
touching them. Once done, the seal should remain in
position.
1
1
Fig. 24
Fig. 25
23
Publicité
