Publicité
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS (SLIDING
HINGE)
With the help of one or two other individuals, move the
appliance into the cabinet. There are two metal plates
at the base of the appliance. Fit the supplied white
spacers to these plates; when finished, snap off the
inverted "T" section.
1) Insert the appliance into the cabinet, placing it on the far
side with respect to the hinges, making sure to leave a
1/ 8" - 3/16" gap.
A
•
A 1/8" - 3/16"
2) After checking the alignment of the appliance door and
the cabinet door, mount the plastic covers from the
accessories bag.
•
A top
3) Tighten the screws for the appliance's lower part.
20
A
Fig. 10
•
A bottom
4) Fit the seal onto the appliance, cutting off any excess as
necessary. Mount the plastic covers on the bottom parts.
Fig. 9
5) Use a crosshead screwdriver to loosen the connecting
pin underneath the right middle hinge and adjust it to
screw onto the right cabinet wall.
A
Fig. 11
Fig. 12
Fig. 13
Publicité
