Publicité
GB
2.5.2
Operating signs
Choke
CLOSE / OPEN
Throttle
Slow / Fast
Engine key
On / Off
Fuel cock
OFF (closed)
ON (open)
Primer button
2.6
Product overview (01)
No.
Component
1
Clutch lever for the travel drive
2
Gear selector lever,
5 forward and 2 reverse gears
3
Clutch lever for the auger drive
4
Hand crank for adjusting the discharge
direction
5
Motor
6
Spark plug connector
7
Height-adjustable skids
8
Clearing plate
9
Transport auger
10
Discharge wheel
11
Plough
12
Cleaning tool (attached to the plough)
13
Snow discharge spout with guard
14
Adjustment of the discharge height
15
Oil filler cap
16
Tank cap
17
Lights*
*: SnowLine 620 E II only
30
3 SAFETY INSTRUCTIONS
DANGER! Danger of fatal injury and dan-
ger of extremely severe injury! Lack of knowl-
edge of the safety instructions and operating in-
structions can lead to extremely serious and even
fatal injury.
■
Observe all safety instructions and instruc-
tions for use in these operating instructions
as well the operating instructions which are
referred to before you start using the appli-
ance.
■
Keep all supplied documents in a safe place
for future reference.
WARNING! Danger of explosion and fire.
Escaping fuel creates an explosive petrol/air mix-
ture. Deflagration, explosion and fire can lead to
serious and even fatal injuries if fuel is not han-
dled properly.
■
Never store the engine in front of naked
flames or heat sources.
■
Never operate the engine in a flammable en-
vironment.
WARNING! Danger of injury from faulty
appliance. Operation of an faulty appliance can
result in serious injury and damage to the appli-
ance.
■
Operate the appliance only when it is undam-
aged and has not defects, and when no parts
are missing or loose.
WARNING! Danger from rotating appli-
ance parts! Reaching into rotating appliance
parts will result in serious injuries!
■
Never reach into the rotating transport auger!
WARNING! Risk of injury. Defective and
disabled safety and protective devices can result
in serious injury.
■
Have any defective safety and protective de-
vices repaired.
■
Never disable safety and protective devices.
3.1
Safety instructions in accordance with
ISO 8437, Annex A
Getting to know the appliance
1. Read the operating and maintenance instruc-
tions through carefully. Familiarise yourself
thoroughly with the control elements and the
proper use of the appliance. Learn to quickly
stop the appliance and switch off the control
elements.
Safety instructions
Publicité
