Error Messages - KERN and SOHN AEJ-C Série Mode D'emploi

22.1 Error messages

Er1 Hi Initial weight error
Er2 nuLL Value below allowed range
Er3 FuL1 Value above allowed range
Er4 FuL2 Weighing range exceeded
Value outside allowed range
Er5 rout
e.g. tare value <= 0,
Reference weight = 0
Er7 tout Disconnecting time too short
Input outside range
Er8 outr
e.g. for tolerance control: Input upper limit<lower limit
Er9 Lock Function blocked
Er10 cal Adjustment error e.g. incorrect adjustment weight}
AEJ-C/AES-C/PLJ-C-BA-e-1513 119