Error Messages - KERN and SOHN MWB 300K-1 Notice D'utilisation

Gravity
not documented

12 Error messages

Display
Description
Zero range exceeded
(on start-up or when pressing the
• Load on weighing pan
• Excess load, during zero setting of weighing scale
• Incorrect adjusting process
• Fault on load cell
Value outside the A/D converter range
• Damaged weighing cell
• Damaged electronics
Unable to initialise zero point
OL or -------- Overload
------or „0" Underload
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.
MWB-BA-e-1710
Gravity
• Measuring cell defective / overloaded
• Object on weighing pan / contact
• Transport safety device has not been removed
• Main board defective
• Unload, switch off and adjust the balance
• Unload, switch off and adjust the balance
key)
19