KERN and SOHN AEJ-C Série Mode D'emploi page 188

(example)
• Return to weighing mode
Press MODE and F1 WEIGHING will be displayed. Confirm by pressing PRINT and
the weighing scale will change to weighing mode.
68
Use the arrow keys to enter the
target weight and confirm by
pressing PRINT.
The display used to enter the
tolerance appears. Enter tolerance
and confirm by pressing PRINT.
The target weight is displayed on the information
line. The symbol for dosing and the MIN symbol
will appear at the upper margin as no load has is
present on the weighing plate. The target weight is
displayed as negative value.
Weight smaller than target weight
Weight within tolerance
Weight greater than target weight
AEJ-C/ AEJ-C/AES-C/PLJ-C-BA-e-1513