Helios MiniVent M1/100 Notice De Montage Et D'utilisation page 24

Installation and Operation Instructions
EN
m
DANGER
MiniVent M1/100/120
Snaps into place every 90° rotation.
– Affix the rubber foam (scope of delivery) before final assembly (Fig.8)
When installing the device, the guide
Fig�8
vane ö must be mounted vertically
(as depicted). Snaps into place every
90° rotation.
ö
vertical for wall installation
4� Mounting flange MF 100 (Accessories)
If there are space restrictions in ceilings, in thin walls and in narrow shafts. Attach MF 100 to the wall
or ceiling at a suitable angle (any number possible). Then fasten the fan to the MF 100 with the provided
screws (Fig.10/Fig.11). Also suitable for mounting a pull-cord switch (Accessories).
Fig�10
MF 100 snap-on
Wall
6�4 Electrical connection
m Danger to life due to electric shock!
All work on/in the unit may only be carried out by qualified personnel in accordance with chapter
„2�1 Personnel qualification" on page 3�
Fig�9
Affix the rub-
ber foam
top
Back
draught
ü
shutter
â
Break out entry
removable
knockout for cable for
wall mounting
bottom
Guide vane ö
Condensate drain holes for
ê
removable
ceiling suspension.
Fig�11
12
MF 100
32
52
8
ê
â
ê ô
Cable grommet
ô
Ceiling