Helios MiniVent M1/100 Notice De Montage Et D'utilisation page 21

Installation and Operation Instructions
CHAPTER 5
CLEANING/
DISMANTLING
m
DANGER
5�1 Cleaning
m
WARNING
5�2 Dismantling of the facia
All subsequent information and instructions are intended solely
for authorised electricians!
MiniVent M1/100/120
m Danger to life due to electric shock!
All work on/in the unit may only be carried out by qualified personnel in accordance with chapter
„2�1 Personnel qualification" on page 3�
m The safety instructions in chapter 1�3 must be observed!
– Before cleaning, isolate the fan from the mains power supply and secure against being switched
on again!
– Clean facia and visible casing parts with a damp cloth
– Do not use aggressive, paint-damaging cleaning agents!
– High pressure cleaners or jet water is not permitted!
Procedure:
1. Isolate fan from mains power supply and secure against being switched on again!
2. By pressing the snap-in hooks, the facia ò can be unlocked and removed (Fig.3/Fig.4).
Fig�3
ò
Unlock and remove
the facia by pressing
the 2 snap-in hooks.
Fig�4
ò
5
EN