Publicité
Fall arrest
WARNING
Risk of injury by falling tool and/or accessory!
▶
Use only the Hilti tool tether recommended for your product.
▶
Prior to each use, always check the attachment point of the tool tether for possible damage.
▶
Do not secure a tool tether to the belt hook. Do not use a belt hook to lift the product.
Comply with the national regulations for working at heights.
As drop arrester for this product, use only a combination of the Hilti retaining strap #2293133 and
the Hilti tool tether #2261970.
▶
Secure the retaining strap to the installation openings for accessories. Check that it holds securely.
▶
Secure one carabiner of the tool tether to the retaining strap and secure the second carabiner to a
load-bearing structure. Check that both carabiners hold securely.
Comply with the operating instructions of the Hilti retaining strap and those of the Hilti tool
tether.
Operation
Observe the safety instructions and warnings in this documentation and on the product.
Switching on
▶
Slide the on/off switch forward.
▶
The motor runs.
Switching off
▶
Slide the on/off switch back.
▶
The engine stops.
Setting speed stage
WARNING
Risk of injury due to change of speed stage when tool is under load. Loss of control over the
product.
▶
Change the speed stage setting only when the product is either switched off or running under no
load.
▶
Hold the product firmly by the grip while changing the speed stage setting with the product running
under no load.
The product has 6 speed stages; use the + and - buttons to select the speed stage you want to use.
You can select a speed stage before you switch on the product or change the speed stage while the
product is running.
The LEDs show the current speed stage.
Setting with product switched off
▶
Press the + button or the - button.
▶
The indicator for speed stages is activated and shows the stage currently selected.
▶
Use the + / - buttons to select the speed stage.
▶
The indicator for the speed stages is deactivated after 15 seconds.
▶
The speed stage you selected is saved in memory.
Setting with product switched on
▶
Use the + / - buttons to select the speed stage.
▶
The speed stage you select is set and remains saved in memory when you switch the product
off.
*2381015*
4
2381015
26
Publicité
