Publicité
9
LUVION
Premium Baby products
3. USING THE BABY MONITOR
Please read these instructions carefully, and be aware that this baby monitor is only intended as
an aid. It is not a substitute for responsible, correct parental supervision.
Note:
Do not place the Baby Unit within the baby's reach! If there is interference with the picture or sound,
try moving the units to different locations, and ensure they are not close to other electrical equipment.
3.1 Power on or off the Parent Unit
Press and hold
to turn on the Parent Unit. The Power indicator light turns on. Press and hold
again to turn off the Parent Unit. The Power indicator light turns off.
Note:
If you place the parent and Baby Units too close together, you may hear echoing sounds and interfer-
ence. This is not a fault. The units are designed to be operated at some distance apart, (e.g. in separate
rooms) so move the units further apart.
3.2 Turn off the Parent Unit screen
You can turn on or off the Parent Unit screen without powering off the Parent Unit. You can still
hear sound from the Baby Unit. Short Press
on the Parent Unit to turn off the screen. Press any
key on the Parent Unit to turn on the screen again.
3.3 Night Vision Mode
The Baby Unit has infra-red LEDs for picking up clear images in the dark. When the built-in light
sensor on the front of the unit detects a low level of ambient light, the LEDs will activate auto-
matically and the screen on the Parent Unit will display in black and white. The
icon will be
displayed at the top of the screen.
3.4 Adjust the speaker volume for Parent Unit
You can adjust the speaker volume from Volume 1 to Volume 5, or turn it off. Press
or
on the Parent Unit when it is in camera viewing mode. When the speaker volume is set to off, the
screen displays
.
3.5 Touch screen operation
25 °C
Swipe up on the bottom of the screen to view the menu bar.
Swipe down on the bottom of the screen to hide the menu
bar.
Publicité
