Publicité
Keep the cords out of reach of children.
•
Do not cover the Baby Monitor with a towel or blanket.
•
Test this monitor and all its functions so that you are familiar with it prior to actual use.
•
Do not use the Baby Monitor in damp areas or close to water.
•
Do not install the Baby Monitor in extreme cold or heat, direct sunlight, or close to a heat source.
•
Only use the chargers and power adaptors provided. Do not use other chargers or power adaptors
•
as this may damage the device and battery pack.
Only insert a battery pack of the same type.
•
Do not touch the plug contacts with sharp or metal objects.
•
Connect the power adaptors to easily accessible electrical sockets.
•
Read and keep the instructions. All the safety and operating instructions should be read before use.
•
This device is designed for indoor use only.
•
Don't use the units if the cord or plug is damaged.
•
Don't attempt to repair or adjust any of the electrical or mechanical functions of the unit. If you do,
•
the guarantee will be made void.
WARNING:
There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries
according to their instructions. To reduce risk of fire or burns.
Do not attempt to disassemble, or service the battery pack.
•
Do not crush, puncture, short external contacts, or dispose of in fire or water.
•
Do not heat above 60
•
Use specific charger only.
•
Replace only with the battery pack designated for this product.
•
2. GETTING STARTED
2.1 Connecting the power supply for the Camera (Baby Unit)
Insert the DC plug of the power adaptor into the DC socket on the back of the Baby Unit.
•
Connect the other end of the power adaptor to mains power.
•
The Green power indicator lights when the baby unit is on.
•
Note:
Only use the power adaptor (5VDC, 1000mA) provided.
LUVION
Premium Baby products
C (140
F).
°
°
7
Publicité
