Publicité
8
2.2 Connecting the power supply for the Monitor (Parent Unit)
The monitor contains a rechargeable battery (Lithium ion 2100mAh). This allows you to move the
monitor without losing the link and picture from the camera. We recommend charging the
monitor for at least 16 hours before first use, and when the monitor indicates the battery is low.
Connect the small plug of the power adapter to the monitor and the other end to mains
•
power. Only use the enclosed adapter (5VDC/1000mA).
Press and hold the
•
automatically linked and ready to use.
Note:
When the Baby and Parent Units are both turned on and within range, the Parent Unit should show a
colour image from the Baby Unit camera, but if the room is dark, the image will be in black and white,
with an
icon showing the Baby Unit is in Night Vision mode.
2.3 Desktop Stand of the Monitor
The monitor comes with a desktop stand attached to the back of the monitor.
•
To place the monitor on a desk, simply pull out the stand, as shown.
•
Note:
Place the monitor on a flat, even surface.
button to turn the Parent unit on, the Parent unit and Baby unit are
Publicité
