Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

16. Technical data

Scale ................................................................1:8
Receiver battery ..............................................5-cell NiMH battery pack (6.0 V rated voltage, 1300 mAh minimum
Drive ................................................................2-stroke combustion engine, 4.1 ccm, 1.54 kW (2.1 PS)
Fuel type ..........................................................Methanol/oil-based fuel for RC model vehicles, 5% - 25%
Tank capacity ...................................................125 cm³
Chassis ............................................................Independent suspension, double wishbones
Dimensions (L x W x H) ...................................585 x 420 x 210 mm
Tyre dimensions (W x Ø) .................................68 x 135 mm
Wheel base ......................................................360 mm
Ground clearance ............................................45 mm
Weight .............................................................4200 g (without receiver battery/fuel)
The product dimensions and weight may vary slightly.
80
capacity) with BEC connection; not included, must be purchased
separately
All-wheel drive
Centrifugal clutch
Differential on the front and rear axle
Centre differential
Drive axles are mounted with ball bearings
nitromethane and 16% synthetic oil
Adjustable oil shock absorbers with coil springs
Adjustable front wheel toe
Adjustable front and rear wheel camber
Adjustable servo saver for the steering servo

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1:8 nitro truggy overheater x 4wd rtr

Table des Matières