Reely 1592466 Notice D'emploi page 71

Setting the rear axle camber:
To adjust the camber, use the threaded bar (A) on the up-
per suspension arm.
This screw has a left and right-handed thread, therefore
you do not need to remove the suspension arm to adjust
the camber.
The rear absorber bridge (B) and steering knuckle (C)
have several different holes for attaching the suspension
arm.
Attaching the suspension arm to a different hole changes
the camber when the wheel moves up and down.
Figure 14
The manufacturer has selected an optimal setting, so
changes are not necessary.
71