Publicité
WARNING: Ensuring Adequate Ventilation
Make sure the induction cooker hob is well ventilated and that air inlet and
outlet are not blocked. In order to avoid accidental touch with the overheating
bottom of the hob, or getting unexpectable electric shock during working, it is
necessary to put a wooden insert, fixed by screws, at a minimum distance of
50mm from the bottom of the hob. Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST ensure
these holes are not blocked by the worktop when you put the hob into
position.
Be aware that the glue that join the plastic or wooden material to the
furniture, has to resist to temperature not below 150
of the paneling.
The rear wall, adjacent and surrounding surfaces must therefore be able to
withstand an temperature of 90
Min. 5 cm
Max. 5 mm
O
C.
EN-31
Max. 5 mm
C, to avoid the unstuck
O
Publicité
