The steps for setting more zones are similar to the steps of setting
one zone;
When you set the time for several cooking zones simultaneously, decimal dots
of the relevant cooking zones are on. The minute display shows the min timer.
The dot of the corresponding zone flashes.
It showns as below:
Once the countdown timer expires, the
corresponding zone will switch off. Then it
will show the new min. timer and the dot
of corresponding zone will flash.
It showns as eg. on the right:
3.3.6 Pause mode
You can pause the heating instead of shutting the hob off.
When entering the Pause mode, all the controls except the ON/OFF and
Pause are disabled.
Touch the pause control
When the hob is in the pause mode, there is instantaneous power every
certain period of time for the activated burner and all the controls are
disable except the ON/OFF
induction hob off with the ON/OFF
The hob will shut down after 10 minutes if you don't exit the pause mode.
set more zones:
To enter pause mode
All the indicator will show
To exit pause mode
Touch the pause control
or pause control, you can always turn the
EN-22
(set to 15 minutes)
(set to 45 minutes)
control in an emergency.