Publicité
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is
placed on it.
3.3.2 Finish cooking
Touching the heating zone selection
control that you wish to switch off
Turn the cooking zone off by touching
"-" to "0" or touching "-" and "+"
control together. Make sure the display
shows "0".
You can also turn a cooking zone off by
touching its cooking zone control for a
while.
Turn the whole cooktop off by touching
the ON/OFF
Beware of hot surfaces
H will show which cooking zone is hot
to touch. It will disappear when the
surface has cooled down to a safe
temperature. It can also be used as an
energy saving function if you want to
heat further pans, use the hotplate
that is still hot.
control.
alternately with the heat setting
EN-17
OR
Publicité
