Fysic FX-8025 Mode D'emploi page 205

14.4 PROBLEMS WITH CALLER IDENTIFICATION
• You do not receive Name or Caller Identification information on the
display of your handset.
- Check whether your carrier transmits these signals (you shall
subscribe to this service with some providers).
• You do receive the numbers on the display of your phone, but not the
name.
- The carrier does not forward names; consult your carrier for this.
- The name has not been programmed in the memory of your
handset; program it. (see paragraph 6.2)
- The name has been programmed in the memory, but the
accompanying phone number has been programmed without area
code; program the number including area code.
14.5 PROBLEMS WITH THE ANSWERING MACHINE:
• No incoming messages are (no longer) being registered:
- The answering function is disabled, please enable it (see paragraph
8.4)
- The recording capacity is full (the
Listen to your messages and delete some of them (see paragraph
8.9 & 8.10)
• No Memo message can be recorded:
- The recording capacity is full (the
Listen to your messages and delete some of them (see paragraph
8.9 & 8.10)
• The answering machine cannot be operated remotely:
- You're entering an incorrect remote code. Check the remote code
or program a new code (see paragraph 8.13)
- You're trying to listen to the answering machine using a pulse
(rotary dial) phone. For operating the answering functions remotely,
you can only use a DTMF phone (you'll hear key tones when
pressing numeric buttons).
light is flashing rapidly).
light is flashing rapidly).
205