Fysic FX-8025 Mode D'emploi page 195

11.6 ALARM (WAKE-UP)
You can program an alarm or wake-up time in the handset. As soon as the
set time is reached, an alarm signal will sound.
SEE FOLD-
OUT PAGE
* When the alarm function is enabled, the handset will emit an alarm signal as soon as
the set time is reached. This signal lasts for 45 seconds or you can press a random
button to stop the signal beforehand.
* In case you have the snooze function enabled, the alarm will be repeated after 5 min-
utes.
* The alarm will sound daily until you disable it according to the above instructions.
FUNCTION:
select the option:
press the OK button and select whether to en-
able (ON) or disable (OFF) the alarm function
when ON:
press the OK button and use the
buttons to set the 'alarm hours'
press the OK button and use the
buttons to set the'alarm minutes'
press the OK button and use the
buttons to enable or disable the snooze
function
press the OK button to save your setting
press the End button to leave the programming
mode
195
ALARM
and
and
and
when OFF: