Fysic FX-8025 Mode D'emploi page 165

4 INSTALLATION
4.1 HANDSET CRADLE / CHARGER:
Insert the adaptor of the handset cradle / charger into a 230V wall socket.
ONLY CONNECT THE INCLUDED ADAPTER. CONNECTING
OTHER ADAPTERS MAY RESULT IN DANGEROUS SITUA-
TIONS OR MAY CAUSE DAMAGE TO THE ELECTRONICS OF
THE PHONE.
4.2 HANDSET:
1. Open the battery compartment of the handset, by
sliding the battery cover down.
2. Insert the batteries into the battery compartment; at
this, pay attention to the polarity (+ and -).
3. Slide the battery cover back onto the handset and
place the handset on the base station.
4. Leave the handset continuously during 15 hours on
the base station, to charge the batteries properly.
INSERT ONLY RECHARGEABLE NiMH (NICKEL METAL HY-
DRIDE) BATTERIES. THE USE OF NOT RECHARGEABLE BAT-
TERIES MAY CAUSE DANGEROUS SITUATIONS OR EXPLO-
SION HAZARD.
As soon as the batteries of the wireless handset are charged and the
wired phone has been connected according to the related instructions, the
wireless handset is ready for use.
165
-
+
- +
the charge indica-
tor will illuminate
as soon as and
for as long as the
handset is placed
onto the cradle /
charger