Fysic FX-8025 Mode D'emploi page 161

2 GENERAL
2.1 ABOUT THE FX-8025:
The FX-8025 is a combination of a wired telephone and a wireless
handset. The wired telephone contains the transmitter and receiver
used for the connection of the wireless handset. You can connect
multiple wireless handsets to the wired telephone; for this, see para-
graph 12.2.
2.2 ABOUT THIS USER MANUAL:
This user manual describes the installation and functioning of the
wireless handset. The wired telephone comes with its own user man-
ual, which means you can consult an individual booklet for both the
telephone and the wireless handset.
2.3 MAINS VOLTAGE & POWER OUTAGE:
The FX-8025 requires a mains voltage supply to function.
Telephone:
The telephone receives power through the supplied power adaptor.
This adaptor should be connected at all times.
Wireless handset:
The wireless handset receives power from rechargeable batteries
inserted into the handset. These batteries are charged as soon as
and for as long as the wireless handset is put onto the charger. Of
course, for this the charger must be connected to the mains via the
adaptor.
In case of a power outage:
During a power outage, you can only make calls using the receiver of
the telephone. The wireless handset and the speaker function of the
telephone cannot be used, while the memory cannot be accessed
(however, the memories will not be lost). During a power outage,
incoming calls are indicated only on the telephone. In this case, the
ringtone of the wireless handset will not function.
161