Publicité
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 First connection
The display shows welcome message after
the first connection.
You have to set: Language, Display
Brightness, Key Tones, Buzzer Volume,
Water Hardness, Time of Day.
5.2 Initial preheating and cleaning
Preheat the empty appliance before the first
use and contact with food. The appliance can
emit unpleasant smell and smoke. Ventilate
the room during preheating.
1. Remove all accessories and removable
shelf supports from the appliance.
2. Set the function
temperature. Let the appliance operate
for 1 h.
3. Set the function
temperature. Let the appliance operate
for 15 min.
4. Turn off the appliance and wait until it is
cold.
5. Clean the appliance and the accessories
only with a microfibre cloth, warm water
and a mild detergent.
6. Put the accessories and removable shelf
supports back to their initial position.
5.3 Setting: Water Hardness
When you connect the appliance to the mains
you have to set the water hardness level.
6. DAILY USE
WARNING!
Refer to Safety chapters.
. Set the maximum
. Set the maximum
Use the test paper or contact your water
supplier to check the water hardness level.
1. Put the test paper into the tap water for
about 1 sec. Do not put the test paper
under running water.
2. Shake the test paper to remove any
remaining water.
3. After 1 min, check water hardness with
the table below.
4. Set the water hardness level: Menu /
Settings / Setup / Water Hardness.
The colours of the test paper continue to
change. Check the water hardness within 1
min after testing.
You can change the water hardness level in
the menu: Settings / Setup / Water Hardness.
The table shows water hardness range with
the corresponding level of water
classification. Adjust the water hardness level
according to the table.
Water hardness level
1 - soft
2 - moderately hard
3 - hard
4 - very hard
Test paper
ENGLISH
9
Publicité
