Publicité
Problem
Cause/remedy
No connection to
Incorrect password
the router
1. Press the SET button
Symbol
le displays "USE-APP".
13
is not displayed
2. Open the app. Open the scale setting in
the app.
3. WIFI radio network/network name (SSID)
of your Internet router and password (WIFI
network key) must match. Re-enter pass-
word/network key. Ensure that the pass-
word/network key matches the one set on
your selected router/WIFI name. Please
remember that this is case sensitive. For
further information, see technical data un-
der "Connectivity".
Incorrect router settings
The device connects to 2.4 GHz. The device
cannot connect to 5 GHz or 6 GHz. Check
the router settings to see if 2.4 GHz is sup-
ported (mixed 2.4 GHz / 5 GHz operation is
possible in principle). Do not use a mobile
WIFI hotspot as it may not be permanently
available. Avoid guest networks.
Measurements
No WIFI/Bluetooth
are not sent
tooth
®
Symbol
is
+
11
13
not displayed
ment. If necessary, reduce the distance bet-
ween the scale and the WIFI router. Check
and test the device settings of the WIFI net-
work in the "beurer HealthManager Pro" app.
Check whether Bluetooth
been deactivated on the scale.
No measurement for the scale user: The
user memory (e.g. U: 1) which appears on the
scale display during a measurement must be
assigned to the scale in your app settings.
Only these measurements can be transfer-
red. Therefore, when taking a measurement,
check your user on the scale and in your app
settings.
If the automatic scale user detection function
is not working, briefly press the scale with
your foot, press the
until your scale user is displayed, and wait
3 seconds. Then take the diagnostic mea-
surement. At the end of the measurement,
the symbol
display. The measurement is then transferred
via Bluetooth
check the device settings in the app.
7. CLEANING AND MAINTENANCE
Clean the surface of the scale from time to time using a slightly damp
cloth. Do not use the scale again until the surface is completely dry.
IMPORTANT
• Do not use any abrasive cleaning products.
• Never submerge the scale in water. Never rinse the scale under
running water.
• Do not place any objects on the scale when it is not in use.
• Protect the scale from knocks, moisture, dust, chemicals, dras-
tic changes in temperature and nearby sources of heat (ovens,
heaters).
on the scale. Sca-
3
connection: Blue-
®
symbol
or WIFI and cloud symbols
10
must be displayed after a measure-
12
and WIFI have
®
button
2
should appear on the scale
11
or WIFI. If this is not the case,
®
8. DISPOSAL
For environmental reasons, do not dispose of the device in
household waste at the end of its service life. Dispose of the device
at a suitable local collection or recycling point in your country. Ob-
serve the local regulations for material disposal. Dispose of
the device in accordance with EC Directive – WEEE (Waste
Electrical and Electronic Equipment).
If you have any questions, please contact the local authori-
ties responsible for waste disposal.
You can obtain the location of collection points for old de-
vices from the local or municipal authorities, local waste disposal
companies or your retailer, for example.
The empty, completely flat batteries must be disposed of through
specially designated collection boxes, recycling points or electro-
nics retailers. You are legally required to dispose of the batteries.
The codes below are printed on batteries containing harmful sub-
stances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
9. TECHNICAL DATA
Model:
Dimensions:
Weight:
Measurement range: 180 kg / 396 lb / 28 st
Scale interval d:
Repetition accuracy: max. +/- 0.4 kg
Absolute precision:
Battery:
Connectivity:
repeatedly
List of compatible
devices:
System
requirements
for "beurer
HealthManager Pro"
app *
Subject to technical changes.
*This product satisfies the requirements of the applicable European
directives.
14
BF 880
300 x 300 x 27 mm
1700 g
kg: 0.1 kg / lb: 0.2 lb / st: between 0-19 st
= 0.2 lb; between 20-28 st = 1 lb / 0.1%
max. +/- (0.5% + 0.1 kg). e.g. for 80 kg:
max. +/- 0.5 kg
3 x 1,5 V AA
Setup can be performed and settings
can be made via Bluetooth
®
technology.
Data transfer preferably via WIFI or
alternatively via Bluetooth
®
technology.
WIFI system requirement: IEEE 802.11
b/g/n (2.4 GHz)
Encryption system requirement:
WPA-PSK, WPA2-PSK, WPA3-PSK
WIFI frequency band: 2412 – 2472 MHz,
transmission power max. 12.99 dBm.
frequency band: 2402 – 2480
Bluetooth
®
MHz, transmission power max. 7.15 dBm.
A list of compatible smartphones, infor-
mation on software and details on the
devices can be found at the following link:
connect.beurer.com
Supported devices
low energy
low energy
Publicité
