Pelgrim GK564 Notice D'utilisation page 87

INSTALLATION
* GK564/GKT564: min. 650 mm
GK575: min. 700 mm
GK595/GKT595: min. 870 mm
Space to be left free around the appliance
A hob generates heat. Leave a sufficient distance between the
appliance and non heat-resistant materials. Take care also with
materials that may discolour (such as stainless steel).
The gas hob may only be built in next to one wall.
Caution!
The bottom of the hob becomes hot. Do not place combustible items in
a drawer if the drawer is fitted directly below the hob.
Install appliance and make connections
• Place the appliance in the worktop and secure it using the mounting
brackets and screws supplied.
• Connect to the gas supply.
• Check with soap suds that the connection is gastight.
• Connect the appliance to mains electricity.
*
EN 21