Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Read the separate safety
instructions before using
the device!
Before using your hob
Switch on the hob
I
Before using your hob for the first time,
each element should be switched on to the
highest setting for 3-4 minutes, without a
pan.
The manufacturer has applied a layer of
rust-preventer to each element. When the
hob is heated for the first time a burning
smell will be noticeable. This is normal.
Appliance information
The heating elements are made of cast iron.
The heat is created by spiral filaments which
lie in the element in rings.
The heat is transmitted to the base of the pan
by direct conduction. Each element is fitted in
a stainless steel sealing rim.
When one or more plates are in use the
control light on the panel will go on.
Publicité
Chapitres
Table des Matières
