Fig. 38
Operation
Using the Palm Router with
Offset Base (PR004)
(Fig. 39, Fig. 40)
set base for more than 10 minutes continu-
ously. Prolonged continuous use will result
in the tool becoming hot to the touch.
The offset base is designed for routing in
confined areas, especially for trimming lami-
nates in areas that are inaccessible with the
28
standard fixed base, such as locations that
are close to adjacent vertical surfaces like as
the tops of already-installed counter back-
splash backsplashes.
The offset base allows routing extremely
close to vertical surface in front of the
Fig. 39
Fig. 40
29
To reduce the risk of in-
jury, do not use the off-
2
29
2
33