Fig. 19
48
53
Fig. 20
21
Assembly
Template Guides for Plunge Base
(PR011) (optional accessory)
The plunge base can also be used with the
optional Bosch-exclusive quick-change tem-
34
plate guide system, which firmly grips the
guides with a spring-loaded ring. Unlike con-
ventional threaded template guides, there is
no threaded ring that can come loose while
routing.
Installing Template Guide Adapter
(RA1126) for Plunge Base
(Fig. 21)
1. Insert the Template Guide Adapter 43
53
into the opening of the Plunge Base 34
and on top of the Subbase
er is reversible so the Template Guide
Release Lever 44 may be positioned on
either side.
2. Align the mounting holes then fasten
the Template Guide Adapter 43 with the
48
provided screws
3. Make sure that the subbase opening is
centered to the Template Guide 45. If
adjustment is needed, loosen the Sub-
base Screws 50 and adjust the location
of the Subbase 21, then retighten the
Subbase Screws 50.
Note: The centering pin and cone is an op-
tional accessory that enables precision cen-
tering of the subbase and template guide.
For more information, see section "Center-
ing Pin and Cone (RA1151)".
Fig. 21
; the adapt-
.
42 21
21
44
43
21